built to stand firm for years
Manufacturing strong solar structures for a sustainable future
Sharda Solar Industries, based in Pune, is engaged in the manufacturing of high-quality solar mounting structures and solar structure components used for rooftop, ground-mounted, elevated, carport, and customized solar panel installations.
With a dedicated 30,000 sq. ft. manufacturing facility, Sharda Solar Industries is equipped to support bulk production, customized fabrication, precision punching, drilling, cutting, bending, welding, finishing, and project-based solar structure manufacturing requirements.
We support solar EPC companies, project developers, contractors, industries, institutions, commercial establishments, and renewable energy projects with durable, accurate, and project-ready solar structure solutions.
Our focus is simple: to manufacture strong, reliable, and long-lasting solar structures that help solar projects stand firm for years.
Precision fabrication, custom manufacturing, bulk production
At Sharda Solar Industries, we understand that the performance and life of a solar project depend not only on the solar panel, but also on the strength of the structure that supports it. Our Pune-based 30,000 sq. ft. facility manufactures both standard and customized solar structures as per client drawings, technical specifications, and project requirements.
Solar Mounting Structure Fabrication
Full-range fabrication for rooftop, ground-mounted, elevated, and carport structures.
C Purlin, Hat, U Profile & Z Section Manufacturing
Structural sections engineered for load-bearing strength and easy site assembly.
MS Pipe & Tube-Based Structures
Round, square, and rectangular tube fabrication for vertical and horizontal support.
Pre-Galvanized & Hot-Dip Galvanized Solutions
Finish options selected for corrosion resistance and project environment.
Cutting, Bending, Punching, Drilling, Welding
In-house processes for accurate, consistent, project-ready components.
Custom Hole Punching & Slotted Hole Patterns
Drawing-based hole layouts matched to panel and mounting specifications.
Drawing-Based, Project-Specific Manufacturing
Structures built to client drawings and site-specific technical requirements.
Bulk Production for Solar EPC Requirements
Scalable output to meet EPC and large project-based demand.
Rooftop, Ground, Elevated & Carport Manufacturing
One facility, the full range of solar structure applications.
Every solar project has different site conditions — our structures are built to match
Wind load requirements, rooftop designs, soil conditions, panel layouts, and installation challenges all vary by project. That's why we manufacture both standard and customized solar structures as per client drawings, technical specifications, and project requirements.
Rooftop Solar Structures
Designed for residential, commercial, industrial, and institutional rooftops — providing proper tilt, alignment, and support to solar panels.
| Tilt Angle | 5° to 30°, customizable |
| Structure Height | 300 mm to 1500 mm |
| Material | Pre-galvanized / MS / hot-dip |
| Thickness | 1.6 mm to 3 mm |
Ground-Mounted Structures
Used for open land solar installations where strong foundation support and structural stability are required.
| Structure Height | 1 m to 3 m |
| Tilt Angle | 10° to 35°, customizable |
| Foundation Type | Pile, concrete, base plate |
| Tube / Pipe Size | 40 mm to 100 mm+ |
Elevated Structures
Used where panels need to be installed at greater height while keeping the space below usable.
| Clear Height | 2 m to 4 m |
| Structure Type | Pipe, tube, beam, C section |
| Material | MS / hot-dip galvanized |
| Finish | Painted / galvanized |
Solar Carport Structures
Combine vehicle parking with solar power generation — ideal for organizations utilizing parking areas for renewable energy.
| Clear Height | 2.5 m to 3.5 m |
| Structure Type | Single-post / double-post |
| Material | MS / hot-dip galvanized |
| Finish | Hot-dip galvanized / painted |
Customized Structures
Manufactured as per site drawings, panel layout, technical requirements, and installation conditions.
| Customizable | Section size, length, thickness |
| Also Customizable | Hole pattern, tilt, height |
| Application | Rooftop or ground-mounted |
Engineering & Drawing Support
Structures designed and manufactured against client drawings, technical specifications, and project requirements.
| Basis | Client drawings & specs |
| Delivery | Bulk or project-based |
A wide range of components used in solar mounting systems
C Purlins
Widely used as structural support members in solar mounting systems. They provide excellent load-bearing strength and are suitable for rooftop and ground-mounted applications.
- Module mounting support
- Rooftop solar structures
- Ground-mounted solar structures
- Industrial solar projects
- Supporting frames
| Height | 40 mm to 120 mm |
| Width | 30 mm to 70 mm |
| Lip | 10 mm to 25 mm |
| Thickness | 1.6 mm to 3 mm |
| Length | 3 m to 6 m |
| Finish | Pre-gal / hot-dip / MS |
Hat Purlins / Hat Sections
Lightweight yet strong sections used for solar panel mounting support. Preferred in rooftop and customized solar structures where clean alignment and easy installation are required.
- Rooftop solar structures
- Module support rails
- Elevated structures
- Light-to-medium solar frames
| Top Width | 40 mm to 100 mm |
| Bottom Width | 80 mm to 150 mm |
| Height | 20 mm to 60 mm |
| Thickness | 1.2 mm to 2.5 mm |
| Length | 3 m to 6 m |
U Profiles / U Channels
Used for support, bracing, mounting, and connection applications in solar structures.
- Base support
- Panel support frame
- Bracing members
- Structural connection members
| Height | 30 mm to 100 mm |
| Width | 30 mm to 60 mm |
| Thickness | 1.6 mm to 3 mm |
| Length | 3 m to 6 m |
Z Sections
Used where overlapping, angular support, or structural load distribution is required.
- Cross-support members
- Ground-mounted solar systems
- Solar mounting framework
- Joining and bracing support
| Height | 50 mm to 150 mm |
| Flange Width | 30 mm to 70 mm |
| Lip | 10 mm to 25 mm |
| Thickness | 1.6 mm to 3 mm |
MS Pipes and Tubes
Used in solar structures where strong vertical and horizontal load support is required.
- Ground-mounted structures
- Elevated structures
- Carport structures
- Column & base support
| Round Pipe | 32 mm to 100 mm dia |
| Square Tube | 25×25 mm to 100×100 mm |
| Rectangular | 40×20 mm to 150×75 mm |
| Thickness | 1.6 mm to 5 mm |
Base Plates and Brackets
Essential for fixing, anchoring, and connecting solar structure members.
- Column base support
- Foundation connection
- Rooftop anchoring
- Structural joints
| Plate Thickness | 3 mm to 12 mm |
| Plate Size | 100×100 mm to 300×300 mm |
| Hole Size | 10 mm to 20 mm |
| Manufacturing | Laser cut / punched / drilled |
Angles, Bracing Members and Connectors
Used for stability, alignment, and additional support in solar structures.
- L angles & tie members
- Cross bracing members
- Connector & support plates
- Foundation support members
| L Angle | 25×25 mm to 75×75 mm |
| Thickness | 2 mm to 6 mm |
| Hole Pattern | Customized |
Three finish systems, selected for the environment your project needs
Pre-Galvanized Structures
Suitable for projects requiring clean finish, moderate corrosion resistance, and faster manufacturing turnaround.
- Uniform zinc coating
- Good corrosion protection
- Clean surface finish
- Cost-effective for standard applications
C purlins, hat sections, U profiles, light rooftop structures, rail support members.
Hot-Dip Galvanized Structures
Preferred for outdoor durability and long-term corrosion resistance, especially in ground-mounted and utility-scale solar projects.
- Superior rust protection
- Longer outdoor life
- Resistance to harsh weather
- Strong protection for heavy structures
Ground-mounted, carport, elevated structures, MS pipes/tubes, base plates.
MS Fabricated Structures
Used where strength, customization, and heavy-duty fabrication are required. Supplied with paint, primer, powder coating, or galvanization as per requirement.
- Heavy support structures
- Carports & elevated systems
- Industrial solar structures
- Customized fabricated frames
Available finish per component
| Product / Component | Available Finish Options |
| C Purlin | Pre-galvanized, hot-dip galvanized, MS |
| Hat Purlin / Hat Section | Pre-galvanized, hot-dip galvanized |
| U Profile / U Channel | MS, pre-galvanized, hot-dip galvanized |
| Z Section | Pre-galvanized, hot-dip galvanized, MS |
| MS Pipe / Tube | MS, pre-galvanized, hot-dip galvanized |
| Base Plates | MS, galvanized, painted |
| Brackets and Connectors | MS, galvanized, customized coating |
| L Angles and Bracing | MS, pre-galvanized, hot-dip galvanized |
| Customized Fabrication Parts | As per drawing and project requirement |
Solar structure components based on client drawings, project requirements, and technical specifications
Every product is developed with focus on consistency, reliability, and project-site usability
- 01 Accurate dimensions
- 02 Proper punching and hole alignment
- 03 Strong fabrication quality
- 04 Smooth finishing
- 05 Corrosion-resistant surface treatment
- 06 Easy assembly at site
- 07 Durable structure life
- 08 Consistent quality in bulk production
At Sharda Solar Industries, we believe that every solar project needs a strong foundation. Our structures are manufactured to support solar panels with strength, accuracy, and long-term reliability.
From small rooftop systems to large ground-mounted solar projects, we are committed to delivering dependable solar structure solutions that help build a cleaner and more sustainable future.
We support a wide range of solar and renewable energy requirements across industries
Solar EPC Companies
Solar Project Developers
Industrial Plants
Commercial Buildings
Residential Solar Installers
Agricultural Solar Projects
Institutions & Campuses
Contractors & Installation Partners
Built for solar projects that need to stand firm for years
Pune-based solar structure manufacturer
Dedicated 30,000 sq. ft. manufacturing facility
Wide range of solar structure components
Customized fabrication capability
C purlin, hat section, U profile, Z section, MS pipe and tube manufacturing
Pre-galvanized and hot-dip galvanized structure options
Project-based bulk manufacturing support
Timely production and dispatch
Focus on dimensional accuracy, durability, and corrosion resistance
Choosing the right solar mounting structure
Practical guidance for Solar EPC companies, developers, and contractors comparing solar structure options before finalizing a supplier in Pune and Maharashtra.
Rooftop vs. Ground-Mounted Solar Structures
Rooftop structures are engineered for lighter loads and tighter tilt-angle ranges on existing roofs, while ground-mounted structures rely on piled or concrete foundations to handle higher wind loads on open land. The right choice depends on site type, available area, and soil conditions.
Pre-Galvanized vs. Hot-Dip Galvanized Structures
Pre-galvanized sections suit standard rooftop projects where a clean finish and faster turnaround matter. Hot-dip galvanization adds a thicker zinc layer for long-term corrosion resistance, making it the preferred choice for ground-mounted and utility-scale installations exposed to weather year-round.
Why Customized Fabrication Matters
Every site has different wind load requirements, rooftop designs, and panel layouts. Customized fabrication — built from project drawings rather than fixed stock sizes — ensures the structure matches actual site conditions instead of forcing a generic fit.
From Project Drawing to Manufactured Structure
Client drawings and technical specifications are reviewed against section size, thickness, hole pattern, tilt angle, and load-bearing requirements before cutting, punching, drilling, bending, and welding begin — so the finished component matches the design intent.
Factors That Affect Solar Structure Selection
Wind load, soil type, roof material, panel size and layout, tilt angle, foundation type, and required material thickness all influence which section type and finish are appropriate for a given project.
A Practical Procurement Checklist
Before requesting a quote, EPC and procurement teams typically confirm site type, structure quantity, tilt angle range, finish requirement, delivery timeline, and whether drawings are available for customized fabrication.
Solar structure manufacturing — frequently asked questions
Our manufacturing facility is located at Gat No. 747, Behind Zendamark Company, Pune–Satara Road, A/P Velu, Taluka Bhor, Pune – 412205, Maharashtra, India.
Yes. We manufacture both standard and customized solar structures as per client drawings, technical specifications, and project requirements, including section size, length, thickness, hole pattern, tilt angle, and foundation type.
We offer pre-galvanized, hot-dip galvanized, and MS fabricated finish options, selected based on the application and corrosion-resistance requirement of the project.
Yes, our 30,000 sq. ft. facility is equipped to support bulk production alongside customized fabrication and project-based manufacturing requirements.
We manufacture rooftop, ground-mounted, elevated, and solar carport structures, along with components such as C purlins, hat sections, U profiles, Z sections, MS pipes and tubes, base plates, brackets, and bracing members.
Tell us about your project — we'll follow up with a quote
Pune – Satara Road, A/P Velu, Taluka Bhor,
Pune – 412205, Maharashtra, India